Menu

Garage Door Weather Seal Bead Type

$22.99$169.99

Garage Door Weather Stripping

Garage Door Weather Seal

Taylor Garage Door Weather Seal

 

Clear
SKU: BLACK BEAD Category:

Description

Garage Door Weather Seal Bead Type


This weather stripping is made out of sturdy flexible premium PVC.

This weather strip replacement is tested to remain flexible to minus 40 degrees.

 

Check out our bead seal overview video to help determine the correct bead seal for your garage door.

 

Garage Door Weather Seal Bead Type:

Dimensions:
3″, 4″ & 6″ Wide, Round bead ends measure 3/16″ – Black.
Choose your width and length by using the options boxes.

3/16″ black bead garage door weather seal.

Made in the USA

Designed to slide into a round channel on the bottom of the door.

We stock this product in GRAY – here – GARAGE DOOR WEATHER SEAL BEAD TYPE – GRAY

We also stock a smaller bead style seal that is common for Finishline Garage Doors here – GARAGE DOOR SMALL BEAD SEAL
The beads on this weather seal are perfectly round, do not confuse them with the similar Wayne Dalton style that is not completely round.

Wayne Dalton seal here – WAYNE DALTON GARAGE DOOR WEATHER SEAL
This garage door weather strip replacement is an exact match to Taylor brand and other garage doors.
All lengths are at least 2″ longer than the length stated for a perfect fit.

Easy to cut to get the perfect fit to your door.

 

 

Easy to install, remove old weather seal, clean and straighten the bottom retainer if needed.

Use a wire brush to clean the bottom of the door and the door weather seal retainer.
Check the ends of the retainer, they may have been pinched when originally installed, open those ends up if needed.
Spray lubricant into the channels of the retainer. One person guides the seal into the tracks, one person pulls the weather seal.
Do not stretch the weather seal tight, move it along the bottom of the door until it is not being stressed or stretched.
Cut off any excess and lightly crimp the ends of the channel to hold the garage door bottom weather stripping in place.

 

If you have a situation that requires a different type of garage door weather seal, or if there is a gap issue that
will not be corrected with this standard weather seal, consider replacing the bottom retainer to a
more standard 1/4″ T style to better fit your situation. That will also allow you to use one of our specialty seals such as ” Rodent Block” or “Super Seal”.

That will allow you to use a wide variety of types and styles of weather seal.
We stock many different bottom retainers and a wide variety of weather seal in the common 1/4″ style.

 

We also offer complete bottom seal kits here – WEATHER SEAL BOTTOM KITS

 

Check out our video for an overview of bead seal and also our videos for these specific products.

Do not hesitate to drop us an email or call if you need any assistance in determining the correct weather seal for your garage door.

Send us photos of the existing seal with dimensions and we will point you to the correct seal.

 

 

Garage Door Weather Seal Bead Type

Additional information

Weight N/A
Dimensions N/A
WIDTH

3" WIDE, 4" WIDE, 6" WIDE

LENGTH

8' LENGTH, 9' LENGTH, 10' LENGTH, 12' LENGTH, 16' LENGTH, 18' LENGTH, 20' LENGTH, 50' LENGTH, 100' LENGTH

You may also like…